;===================================================================================;; File:		ApplPrimaryInit.a;; Entry:	VendorPI;; Function:	Zorro initialization code ;   {;	for (count = loopcount; ((count >0) && (bcpTestState != DONE)); count--)  {};;	if ((bcpTestState != DONE) || (bcpTestErr));	   error();;	stop_bcp();;	Test 8344 Data RAM locations 0x0000-0x3FFF with patterns FF, AA, 55, and 00;;	Test 8344 address lines;;   };; Input:	D0 = Current current test state ;		A2 = slot address;		A3 = ptr to Slot Manager parameter block;; Output:	D1 = PASS or FAIL;		($138) = 32 bit failure code if D1 == FAIL;; Update:	D0, A2, A3 preserved;; History:	12/03/87: initial version;;===================================================================================	EJECT;bcpRIC		equ	$420001			; 8344 remote interface configuration register;bcpPC		equ	$400001			; Dummy address for writing to 8344 PC;bcpDRAM		equ	$400001			; 8344 Data RAM address base;bcpDMEnd	equ	$4000 * 2 + bcpDRAM	; Last data memory + 1;RIC_DRAM	equ	$30			; Select 8344 Data RAM;PASS		equ	0;FAIL		equ	-1		VendorPI: 	move.l	D0, -(sp)		; save test state	move.l	A2, -(sp)		; save slot address	move.l	A3, -(sp)		; save Slot Mgr Parameter block ptr	move.l	D0, $150(A2)	move.l	D1, $154(A2)	move.l	D2, $158(A2)	move.l	D3, $15C(A2)	move.l	A0, $160(A2)	move.l	A1, $164(A2)	move.l	A2, $168(A2)	move.l	A3, $16C(A2)	;; - Test 8344 Data RAM;	movea.l	#bcpDRAM, A4		; point to location 0000 of data memory	adda.l	A2, A4			; add slot address	movea.l	#bcpDMEnd, A3		; ending location	adda.l	A2, A3			; add slot address	jsr	zi_RAM			; test interface area (0x0000 - 0x3FFF)	bne.s	zi_err			; skip if error	move.l	#PASS, D1		; no error	bra.s	zi_rtn			; exit	;---------------------------------------; - Error exit;---------------------------------------zi_err:	move.l	#FAIL, D1		; test failed	;---------------------------------------; - Exit;---------------------------------------zi_rtn:	move.l	D0, $170(A2)	move.l	D1, $174(A2)	move.l	D2, $178(A2)	move.l	D3, $17C(A2)	move.l	A0, $180(A2)	move.l	A1, $184(A2)	move.l	A2, $188(A2)	move.l	A3, $18C(A2)	move.l	(sp)+, A3		; restore Slot Mgr Parameter block ptr	move.l	(sp)+, A2		; restore slot address	move.l	(sp)+, D0		; restore test state	move.l	D0, $190(A2)	move.l	D1, $194(A2)	move.l	D2, $198(A2)	move.l	D3, $19C(A2)	move.l	A0, $1A0(A2)	move.l	A1, $1A4(A2)	move.l	A2, $1A8(A2)	move.l	A3, $1AC(A2)		rts	EJECT;===================================================================================;; Name:		zi_RAM;; Function:	Test 8344 Data Memory ;; Input:	A4 = starting RAM address;		A3 = ending RAM address + 1;		A2 = slot address;; Output:	Z flag set   => no error;		Z flag clear => error (D1 = data written; D2 = data read back;;				       A4 = failed address);; Update:	None;; History:	12/03/87: initial version;;===================================================================================				zi_RAM:	movea.l	#bcpRIC, A1	; address of 8344 RIC	adda.l	A2, A1		; NuBus address	move.l	A4, D3		; save starting location	moveq	#RIC_DRAM, D0	; select Data memory	move.b	D0, (A1)	;	move.b	#$FF,D1		; data pattern@1:	move.b	D1, (A4)	; write to memory	cmp.b	(A4), D1	; read it back check	bne.s	@90		; jump if errror					addq.l	#2, A4		; addr.ptr++	cmp.l	A3, A4		; check if reached end	bne.s	@1					movea.l	D3, A4		; reset pointer to where it started	moveq	#$55,D1		; data pattern@2:	move.b	D1, (A4)	; write to memory	cmp.b	(A4), D1	; read it back check	bne.s	@90		; jump if errror					addq.l	#2, A4		; addr.ptr++	cmp.l	A3, A4		; check if reached end	bne.s	@2						movea.l	D3, A4		; reset pointer to where it started	move.b	#$AA,D1		; data pattern@3:	move.b	D1, (A4)	; write to memory	cmp.b	(A4), D1	; read it back check	bne.s	@90		; jump if errror					addq.l	#2, A4		; addr.ptr++	cmp.l	A3, A4		; check if reached end	bne.s	@3					movea.l	D3, A4		; reset pointer to where it started	moveq	#$00,D1		; data pattern@4:	move.b	D1, (A4)	; write to memory	cmp.b	(A4), D1	; read it back check	bne.s	@90		; jump if errror					addq.l	#2, A4		; addr.ptr++	cmp.l	A3, A4		; check if reached end	bne.s	@4		rts			; good return@90:	move.b	(A4), D2	; D2 = data read back	move.b	#1, D3		; insure Z = 0	rts			; return		;===================================================================================; Entry:	(Status indicator routines);; Function:	;	When execution of primary init begins, ShowInProgress (which could turn on all LEDs);	is called, indicating that the test is in progress.  if primary init crashes;	it will then be evident that testing did not complete.  If any tests fail,;	the routine ShowFail is called (perhaps to leave on a red LED), and if all ;	self-tests pass, the routine ShowPass is called (perhaps to leave on a red LED). ;	ShowOff is called to turn off all indicator status.;   ; 	Remember that the following routines are executed across NuBus, and therefore;	32 bit NuBus addressing must be used.;===================================================================================ShowInProgress:			;turn on red & green LED or do whatever to indicate test running				;Reg A2 contains the 32 bit base address of the card	move.l	d1, -(sp)	;save & restore any registers changed	move.l	#$600001, d1	;currently defined Zorro LED control register	move.b	#$3, (a2, d1.l) ;write to LED control register (turn on red & green)	move.l	(sp)+, d1	rts				ShowPass:			;turn on green LED or do whatever to indicate good status				;Reg A2 contains the 32 bit base address of the card	move.l	d1, -(sp)	;save & restore any registers changed	move.l	#$600001, d1	;currently defined Zorro LED control register	move.b	#$1, (a2, d1.l) ;write to LED control register (turn on green only)	move.l	(sp)+, d1	rts				ShowFail:			;turn on red LED				;Reg A2 contains the 32 bit base address of the card	move.l	d1, -(sp)	;save & restore any registers changed	move.l	#$600001, d1	;currently defined Zorro LED control register	move.b	#$2, (a2, d1.l) ;write to LED control register (turn on red only)	move.l	(sp)+, d1	rts				ShowOff:			;turn off green & red LED				;Reg A2 contains the 32 bit base address of the card	move.l	d1, -(sp)	;save & restore any registers changed	move.l	#$600001, d1	;currently defined Zorro LED control register	move.b	#$0, (a2, d1.l) ;write to LED control register (turn off green & red)	move.l	(sp)+, d1	rts					EJECT